欢迎您访问无锡市三灵干燥设备厂官方网站!

WRG高速离心雾化器
雾化器

来源:三灵干燥    更新时间:2018-03-22     点击次数:次

37.jpg
WRG高速离心雾化器   WRG High Speed Centrifugal Atomizer
概述 Descriptions
该雾化器是喷雾干燥装置中使雾化介质获得高能量、高速度的部件,也是对雾化效率和雾化过程稳定性起重要作用的关键部件。它由电动机通过联轴器带动大齿轮,大齿轮与转动轴上的小齿轮啮合,经过一级增速后的齿轮轴带动二级大齿轮实现雾化盘的高速旋转。当料液进入离心雾化器的进料管,通过料液分配盘均匀地流入高速旋转的喷雾盘中,料液即被喷成极小的雾化液滴,使料液表面积大大增加,与干燥室内的热空气接触,水分迅速蒸发,能在极短的时间内干燥为成品。
The atomizer is a spray drying device to make the atomizing medium to obtain high-energy, high-speed components, also it play an important role on the atomization efficiency and stability .It is driven by the motor through a large gear coupling, large gear and the rotating shaft of the small gear meshing, after a growth gear shaft driven two large gear to achieve high-speed rotation of the atomization disk. When the feed liquid into the centrifugal atomizer feed pipe, through the liquid distribution plate ,liquid enter into the high-speed rotation of the spray tray, the liquid is sprayed into a very small atomized droplets, the liquid surface area greatly increased, contact with hot air in drying chamber, rapid evaporation of water in a very short period of time .
 
特点 Features
齿轮传动在物料进料量波动时,转速恒定,机械效率较高;
采用长悬臂结构,使主轴运行时可实现“自动对中”效果,减少主轴和雾化盘的振动。
设置浮动轴承,使挠性轴实现三支点支撑,实现轴系迅速越过临界转速。
合理布置支承固定位置,将固定支承位置布置于节点位置,减少轴系的振动载荷。
 
Speed constant and high mechanical efficiency gear transmission in the material feed rate fluctuations;
Long cantilever structure make "automatic centering" effect, reducing the spindle and atomization disk vibration.
Floating bearing make three fulcrum supports for flexible shaft, The Designing can achieve rapid cross-critical shaft speed.
Reasonably arranged support fixed position, the location of the fixed support position in the node to reduce the vibration load shaft

结构示意图 Sketch of Oven 

36.jpg

联系我们contact us

无锡市三灵干燥设备厂

联系人:刘经理

手机:13961737591

电话:0510-83382130

传真:0510-83385830

邮编:214181

地址:无锡市惠山区前洲前石路225号

热门产品 Hot products
东方彩票 德国时时彩 极速3分彩 荣鼎国际 东方彩票 三分快3 极速快乐十分 极速快乐8 极速快3 分分彩